 |
|
|
Dimension Laboratory |
|
|
|
DIMENSION (AT LAB except Profile Projector & Surface Plate)
| Sl. No. |
INSTRUMENTS / PARAMETERS THAT CAN BE CALIBRATED |
RANGE / REMARKS |
| 1. |
Plain Plug Gauge |
3 to 200 mm |
| 2. |
Length Bar / Setting Rod |
25 to 500 mm |
| 3. |
Thread Plug Gauge (Effective Dia) |
M3 to M100 (3 mm to 100 mm) |
| 4. |
Angle / Bevel Protractor / Combination Set |
0 to 180° |
| 5. |
Pitch Gauge Pitch 0.4 to 6 mm/Angle |
55 to 60° |
| 6. |
Steel Tape |
Up to 200 m |
| 7. |
Standard Foils |
0 mm to 2 mm |
| 8. |
Spirit Level / Frame type level |
300 mm |
| 9. |
Pi Tape |
Up to 3 m |
| 10. |
Cylindrical Measuring Pin |
Up to 20 mm |
| 11. |
Snap Gauge |
3 mm to 300 mm |
| 12. |
Plain Ring Gauge / Cylindrical Setting Master |
5 mm to 200 mm |
| 13. |
Angle Gauge Block |
0 to 90° |
| 14. |
Straight Edge |
Upto 1000 mm |
| 15. |
Profile Projector & Microscope
Linear
Angle
Magnification |
X Axis – 0 mm to 150 mm
Y Axis – 0 mm to 100 mm
0 to 360°
10x to 50x |
| 16. |
Sine Bar (200 mm) |
Up to 45° |
| 17. |
Caliper Checker/ Step Gauge |
0 to 600 mm |
| 18. |
Thread Measuring Wire |
0.17 to 6.35 mm |
| 19. |
Electronic Comparator |
Up to 10 mm |
| 20. |
Dial Calibration Tester |
Up to 25 mm |
| 21. |
Micrometer Head / Drum |
Up to 25 mm |
| 22. |
Thread Ring Gauge |
6 mm to 200 mm |
| 23. |
Taper Plain Ring Gauge (Angle) |
Up to 5° |
| 24. |
Standard Wire Gauge |
0.19 to 10 mm |
| 25. |
Engineer’s Square/Set Square/L Square/Tri |
100 x 150 mm |
| 26. |
Taper Plain Plug Gauge (Half Angle) |
Up to 5° |
Rest 20 items as per old scope: Other than above mentioned 26 items, rest 20 items are also there as per the old scope like-Gauge Block, Feeler Gauge, Radius Gauge, Scale, Test Sieve, Vernier/Dial /Digital Caliper, Height Gauge, Depth Gauge, External Micrometer, Internal Micrometer, Depth Micrometer, Plunger Type/Lever type Dial Indicator, Bore Gauge, Dial Thickness Gauge, Hegman Gauge, Coating Thickness Gauge, Pistol Caliper, Internal Caliper, Surface Plate. |
Standard Instrument used in Dimension Laboratory:
• Slip Gauge Set, ‘K’ Grade, Make: Aditya
• Slip Gauge Set, Grade ‘0’, Make: Aditya
• Slip Gauge Set, Grade ‘1’, Make: Aditya
• Long Slip Gauge Blocks (Steel), Make: Aditya (125 mm to 500 mm)
• Gauge Block Calibrator, Make: Mikronix, Model: GBC 931
• Digimatic Height Gauge, Make: Mitutoyo
• Profile Projector, Make: Metrology Equipment Pvt. Ltd., Model: DELTA FM 40
• Electronic Mini Level, Make: WYLER
• Sine Bar, Make: Precision Gauge & Fixture Pvt. Ltd.
• Bevel Protractor, Make: Mitutoyo
• Surface Plate, Make: Bagson
• Standard Thickness Foils, Make: A. A. Industries
• Ultrasonic Thickness Gauge, Make: Metravi, Model No. UTG-01
• A Set of Angle Gauges, Make: Mikronix
• Digital Linear Scale with Indicator, Make: Ditron, Model: DC 501 (for Scale) & DC 11 (for Indicator)
• Glass Scale, Make: Easson, Model: 48-3
• Electronic Probe with D.R.O. Probe, Make: Solartron
• Single Axis Measuring Machine, Make: Aditya, Model No. LAB MICROCAL 600
ACCELERATION & SPEED (AT LAB & AT SITE)
| Sl. No. |
INSTRUMENTS / PARAMETERS THAT CAN BE CALIBRATED |
RANGE / REMARKS |
| 1. |
RPM (Non Contact) |
6 rpm to 60000 rpm |
Standard Instrument used in Acceleration & Speed Laboratory:
• Multifunction Calibrator, Make: Fluke, Model: 5520A
Download E-Brochure of Electro Meter Corporation
|
|
|
|
|
|
| |
|
|
